Mechanical Engineering Teaching Faculty

 

B.Tech: - Mechanical Engineering, Nagarjuna University, 1991
M.Tech:
- Thermal Engineering, JNTU Hyderabad, 1996
Ph.D.:
- Heat Transfer, JNTU Hyderabad, 2008

Dr. V. Murali Krishna
Professor and Head,
Mechanical Engineering Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 24 years (along with R&D experience)

Professional Affiliations

  1. MISTE
  2. ISTE
  3. ASME

Awards and Recognition:

  1. Best Researcher award for the academic year 2007-2008 at G.V.P. College of Engineering, Visakhapatnam.
  2. Selected for Marquis Who's Who in the World 2011 for Publication of papers in international referred Journals such as American Society of Mechanical Engineering (ASME) Journal of Heat Transfer, USA and International Journal of Heat Mass Transfer, Elsevier, U.K.
  3. Editorial board number member for the international journals published by Science Publishing Group System, USA
  4. Reviewer for International Journal of Heat and Mass Transfer and Fuel published by Elsevier Publications, U.K.

Academic & Professional accomplishments:

  1. Currently guiding 2 Ph.D. Students
  2. No. of B.Tech. project guided: 45
  3. No. of international journal& international conference publications:16

Fields of Specialization:

  1. Thermal Engineering
  2. Heat Transfer

Fields of interest:

  1. Heat Transfer by Condensation in the presence of Non- Condensable Gas
  2. Electronic Cooling
  3. Nano-fluids
  4. Micro-Scale Heat Transfer and Fluid Flow
  5. Combustion in I.C. Engines
  6. Alternative Fuels

Research Papers Published

  1. "Experimental study on condensation of humid air in laminar flow in a vertical channel" (Article No: HTR-7475), Journal of Heat Transfer Research.Accepted for Publication
  2. "Convective condensation of vapor in laminar flow in a vertical parallel plate channel in the presence of a high con-centration non-condensable gas" ASME Journal of Heat Transfer; American Society of Mechanical Engineering, U.S.A; Jan, 2009 Vol. No. 131 pp. 011502-1-7
  3. "Convective condensation of vapor in the presence of a non-condensable gas of high concentration in laminar flow in a vertical pipe" International Journal of Heat and Mass Transfer; Elsevier United Kingdom; Dec, 2008 Vol. 51, pp. 6090-6101
  4. “A theoretical study on convective condensation of water vapor from humid air in turbulent flow in a vertical duct” ASME Journal of Heat Transfer;American Society of Mechanical Engineering, U.S.A; Dec, 2007 Vol. No.129,pp. 1627-1637

International Conferences Preceedings:

  1. "Pressure Drop and Deposition Rate in Chemical Vapor Deposition – A Theoretical Study on Effect Of System Parameters"; 4-6,January, 2010;20 th National &9th ISHMT–ASME Heat and Mass Transfer conference. IIT, Bombay, India.
  2. "Experimental Study on Condensation of Water Vapor in The Presence of High Concentration Non-Condensable Gas In Laminar Flow in a Vertical Channel"; 4-6,January, 2010;20 th National &9th ISHMT–ASME Heat and Mass Transfer conference. IIT, Bombay, India.
  3. "Convective Heat Transfer Characteristics of Sisal-Water Nanofluid in a Shell and Coil"; 27-29, Dec. 2008; 4th BSME-ASME international conference on thermal engineering.
  4. "Theoretical Analysis on Pressure Drop and Heat Transfer in Laminar Flow of a Pseudoplastic Fluid through a Pipe"; 15-17, December, 2008; International conference on Advances in Mechanical Engineering NIT, Surat, India
  5. "Condensation of vapor in laminar flow in a pipe in the presence of a non-condensable gas of high concentration - A heat and mass transfer analysis"; January 3 – 5, 2008; 19th National &8th ISHMT –ASME Heat and Mass Transfer conference. JNTU, Hyderabad, India
  6. "Condensation of Vapor in the Presence of a High Concentration Non-Condensable Gas in a Horizontal Parallel Plate Channel under Turbulent flow Conditions"; January 3 – 5, 2008; 19th National &8th ISHMT –ASME Heat and Mass Transfer conference. JNTU, Hyderabad, India
  7. “Condensation of Vapor in the Presence of a High Concentration Non-Condensable Gas during Laminar Flow of Air over a Flat Plate” Held in ITALY ; January 4 – 6, 2006; ISHMT–ASME Heat and Mass Transfer conference. IIT Guwahathi, India

 

kvnsr

B.Tech: - Mechanical Engineering, Nagarjuna University, 1986
M.Sc(Engineering):
- Heat Power Engineering, Sambalpur University, 1992
Ph.D.:
- Heat Transfer, NIT Warangal, 2005

Dr. K.V.N. Srinivasa Rao
Professor,
Mechanical Engineering Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 26 years

Professional Affiliations

  1. Life Member of ISTE (Indian Society for Technical Education)
  2. Life Member & Executive member of Condition Monitoring Society of India
  3. Member of Power Engineering Society (PES) of International Association of Computer Science & Information Technology (IACSIT)

Sponsored Projects Completed

  1. “Augmentation of Thermal Conductivity of Nanofluids” worth of 6.9 lakhs is supported by AICTE, New Delhi under RPS.
  2. “Combustion of Agro-waste with Fluidized Bed Technique” a project is completed and submitted to Department of Science & Technology, New Delhi, India with financial support of Rs.3.6 Lakhs provided under Young Scientist Scheme (Letter No. HR/OY/E-10/98) in the year 2003.
  3. “Hydrodynamics of Municipal Solid Waste pellets” a project is completed and submitted to A.P. State Council of Science & Technology, Hyderabad, India, with financial support provided under Students Project Programme in the year 2007.
  4. “Design and Fabrication of Solar Pressure Cooker” a project is completed and submitted to A.P. State Council of Science & Technology, Hyderabad, India, with financial support provided under Students Project Programme in the year 2007.
  5. “Low Cost Water Cooling System” a project is completed and submitted to A.P. State Council of Science & Technology, Hyderabad, India, with financial support provided under Students Project Programme in the year 2003.
  6. “Hydrodynamics of Fluidized Bed” a project is completed and submitted to A.P. State Council of Science & Technology, Hyderabad, India, with financial support provided under Students Project Programme in the year 2002.
  7. “Solar Water Heating System” a project is completed and submitted to Vignan Educational Society, Guntur with financial support provided under Students Project Programme in the year 2002.

Awards and Recognition:

  1. Reviewer of the following reputed International Journals a) Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, International Journal of Taylor & Francis Group, USA. b) Combustion Science & Technology (Taylor & Francis Group), USA. c) International Journal of Sustainable Energy (Taylor & Francis Group), USA. d) International Journal of Sustainable Engineering (Taylor & Francis Group), USA. e) International Journal Energy Research (John Wiley Inter Science Publications), USA. f) International Journal Solar Energy (Elsevier Publications), USA.
  2. Reviewer of The 12th International Conference on Fluidization: New Horizons in Fluidization Engineering which is to be organized on May 13-17, 2007 at Harrison Hot Springs – near Vancouver, B.C. (Canada)
  3. Research Collaboration with Dr. B.V. Reddy, Department of Mechanical Engineering, University of Ontario, Canada.
  4. Key note speaker in International Conference on Advances on Thermal and Energy Systems (AITES-2013) has been held on August 09- 10, 2013 at Gandhi Engineering College, Bhubaneswar.
  5. Key note speaker in International Symposium on Recent Advances in Integrated Energy and Energy Conservation (RAIEEC-2012) has been held on Dec. 19- 20, 2012 at Hyderabad.
  6. Chaired one of the technical session on Bio Energy Systems in International Symposium on Recent Advances in Integrated Energy and Energy Conservation (RAIEEC-2012) has been held on Dec. 19- 20, 2012 at Hyderabad.
  7. Keynote speaker in National Conference on Modern Trends in Mechanical Engineering (MTiME-2012) during 18th and 19th February, 2012 at GIET, Gunupur.
  8. During my tenure as a Principal of Vignan’ Engineering College, the institution was accredited by National Assessment and Accreditation Council (NAAC) of UGC, Govt. of India, New Delhi and also was conferred with Deemed University Status
  9. During my tenure as a Head of Department of Mechanical Engineering at Vignan’ Engineering College, the B.Tech course is accredited by National Board of Accreditation (NBA) of AICTE, Govt. of India New Delhi and also certified by ISO 9001:2000.
  10. Governing Body member of Loyola Institute of Technology and Management, Sattenapalli, Guntur District.

Academic & Professional accomplishments:

  1. Currently guiding 1 Ph.D. Students
  2. No. of B.Tech. project guided: 25
  3. No. of international journal & international conference publications:35

Fields of Specialization:

  1. Heat Transfer

Fields of interest:

  1. Fluidized Bed Combustion
  2. Biomass Combustion & Gasification
  3. Renewable Energy Sources
  4. Biofuel Testing & Performance in I.C. Engines
  5. Nano fluids and its applications

Research Papers Published

  1. Srinivasa Rao, K.V.N. and Venkat Reddy, G. Combustion studies of rice husk in fluidized bed. Journal of Water and Energy International, Vol.62, No.2, April-June 2005, pp.22-28.
  2. Srinivasa Rao, K.V.N. and Venkat Reddy, G. “Effect of distributor design on temperature profiles in fluidized bed during the combustion of rice husk” Combustion Science &Technology Journal of Taylor & Francis Publications, USA, Vol.179, 2007, pp.1589-1603.
  3. Srinivasa Rao, K.V.N. and Venkat Reddy, G. “Effect of secondary air injection on the combustion efficiency of sawdust in fluidized bed combustor” Brazilian Journal of Chemical Engineering, Brazil, Vol.25, No.1, 2008, pp.1-13.
  4. Srinivasa Rao, K.V.N. “Effect of shape of the baffles on hydrodynamics of fluidized bed” International Journal of Chemical Reactor Engineering, The Berkley Electronic Press, USA, Vol.6, A42, 2008, pp. 1-12.
  5. Srinivasa Rao, K.V.N., Kumar, K.P., Saibabu, J., Rao, D.N. and Srikanth, I “Experimental analysis of sisal Nanofluids in a shell coil Heat Exchanger” International Journal of Nano System, Vol.1, No.1, 2008, pp.85 – 88.
  6. Srinivasa Rao, K.V.N., Kumar, K.P., Saibabu, J., Rao, D.N. and Rao, G.V.N. “Preparation & Characterization of Biodegradable Nanoparticles” International Journal of Nano System, Vol.1, No.1, 2008, pp. 1 – 4.
  7. Srinivasa Rao, K.V.N. and Venkat Reddy, G. Cold Flow Studies of Rice Husk, Saw Dust, and Groundnut Shell Fuels in a Fluidized Bed. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Vol. 32, Issue 18 January 2010 , 1701 – 1711.
  8. Srinivasa Rao, K.V.N. and Venkat Reddy, G. Fluidized Bed Combustion of Groundnut shells for Energy Recovery. Energy Sources, Part A Recovery, Utilization, and Environmental Effects, Vol.33:833-844, 2011.
  9. Srinivasa Rao, K.V.N. and Venkat Reddy, G. Comparison of combustion characteristics of rice husk, sawdust and groundnut shells in a bubbling fluidized bed. Energy Sources, Part A Recovery, Utilization, and Environmental Effects, Vol.33:2181-2193, 2011.
  10. Srinivasa Rao, K.V.N., Kumar K. P., Krishna K.R., Rao D.N. and Theja B. Neural network based vibration analysis with novelty in data detection for a large steam turbine. Shock and Vibration (International Journal), Vol.19, pp.25-35, 2012.
  11. Srinivasa Rao, K.V.N., Rao, B.J.M. and Kumar, K.P. Thermal Performance of a Central Annular Cavity Vessel with Fins of a Box type Solar Cooker. International Journal of Sustainable Engineering, Vol.5, Issue 2, 91-96, 2012.
  12. Srinivasa Rao, K.V.N., and Rao, B.J.M. Low Cost Solar Cooling System. International Journal of Engineering and Innovative Technology (IJEIT), Vol.3, Issue 4, 58-61, 2013.

 

VVNRPR

B.Tech: - Mechanical Engineering, Gulbarga,1988
M.Tech:
- Machine Design, BITS PILANI, BITS, 1993
Ph.D.:
- Pt.Ravishankar Shukla University, Paipur, 2001

Dr.V.V.N.R. Prasada Raju
Professor,
Mechanical Engineering Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 22 years

Professional Affiliations

  1. AMM
  2. MISTE

Academic & Professional accomplishments:

  1. No. of B.Tech. project guided: 22
  2. No. of international journal & international conference publications:20

Fields of Specialization:

  1. Machine Design

Fields of interest:

  1. Design of Machine Elements
  2. Mechanisms of Machines

 

PR.A

B.Tech: - Mechanical Engineering, V.R.E.C-Nizamabad, 2001
M.E.:
- Machine Design,A.U. College of Engineering-Visakhapatnam, 2007
Ph.D.:
- NIT Warangal, Warangal, 2012

Dr. A. Padma Rao
Professor,
Mechanical Engineering Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 13 years
Industrial Experience – 1 years

Professional Affiliations

  1. AMM
  2. MISTE

Awards and RecognitionPattents:

  1. A Mechanism for Steering of a Four Wheeler, Application No. 704/CHE/2010, dated 17 March 2010
  2. A Mechanism to Provide Perfect Steering Condition in Four Wheeler Vehicle,Application No. 1913/CHE/2010, dated 06 July 2010

Academic & Professional accomplishments:

  1. No. of B.Tech. project guided: 18
  2. No. of international journal & international conference publications:20

Fields of Specialization:

  1. Machine Design

Fields of interest:

  1. Design of Machine Elements
  2. Mechanisms of Machines

Research Papers Published:


International Journals:

  1. Analysis of Steering Offered by Ackerman Mechanism,International Journal on Mechanical andAutomobile Engineering, Vol.09, No.01, March 2010, pp.37-45.
  2. Optimum Design of Ackerman Mechanism, International Journal on Mechanical and Automobile Engineering, Vol.15, No.01, May 2011, pp.64-76.
  3. A Simple Mechanism Promising Perfect Steering, International Journal on Mechanical and Automobile Engineering, Vol.17, No.1, Aug-Sept 2011, pp.48-55.
  4. A Simple Gear Type Mechanism for Steering of an Automobile, International Journal on Mechanical and Automobile Engineering, Vol.17, No.1, Jan 2012, pp.29-36.
  5. Steering of an Automobile using Belt Drive, International Journal of Current Engineering and Technology, Special Issue-2, Feb 2014, pp. 610-614.
  6. Power Generation from Speed Breaker by Rack and Ratchet Mechanism, International Journal of Current Engineering and Technology, Special Issue-2, Feb 2014, pp. 549-552.
  7. Development of New Steering Mechanisms, an international article Mobility Engineering (Magazine) in Auto Expo-2014 SAE-India, Chennai. June-2014.
  8. Estimation of Skidding Offered by Ackermann Mechanism, Journal of Institution of Engineers (India)-Series C, Springer, January-2015. Accepted.

Conferences:


International:

  1. Optimization of Plate Cam Size, Proceedings of International Conference on Fascinating Advancement in Mechanical Engineering (FAME-2008), Mepco Schlenk Engineering College, Sivakasi, Tamilnadu, India, 11-13 December 2008, pp.381-386.
  2. Graphical Approach for Optimum Design of Steering Mechanism, Proceedings of Fourth International Conference on Advances in Mechanical Engineering (ICAME-2010), S.V. National Institute of Technology, Surat – 395 007, Gujarat, India, 23-25 September, 2010, pp. 100-104
  3. A Search for Optimum Angle of Bell Crank Lever of Steering Mechanism, Proceedings of 55th Congress of ISTAM (An International Meet), National Institute of Technology, Hamirpur-5, (H.P), India, 18-21 December, 2010.
  4. Development of A New Steering Mechanism for Automobiles, The Second ASME/IEEE International Conference on Reconfigurable Mechanisms and Robots ( ReMAR 2012), China, 9-11 July 2012, Part 2, DOI: 10.1007/978-1- 4471-4141-9_20, pp.209-219.
  5. Steering of an Automobile using Belt Drive, International Conference on Advances in Mechanical Sciences, VCE-Hyderabad, 9-11 Jan 2014, pp. 344-351.
  6. Power Generation from Speed Breaker by Rack and Ratchet Mechanism, International Conference on Advances in Mechanical Sciences, Vardhaman College of Engineering, Hyderabad, Andhra Pradesh, INDIA, 9-11 Jan 2014, pp. 174-178.
  7. Promoting Entrepreneurship in India, International Conference on Next Generation Education for Entrepreneurial Engineers, SR Engineering College, Warangal, Andhra Pradesh, INDIA, 10th & 11th March 2014, pp. 8-13.


National:

  1. A CAD/CAM System for Optimization of Plate-Cam Size, Proceedings of National Conference on Computer Applications in Mechanical Engineering (CAME-2005), J.N.T.U. College of Engineering, Ananthapur (A.P), 21 December 2005, pp.30-34.
  2. Design, Fabrication and Analysis of Catalytic Converter, Proceedings of National Conference on State of Art of Technologies in Mechanical Engineering (NCSAME-2006), J.N.T.U. College of Engineering, Hyderabad (A.P), 5-6 May 2006, pp.35-38.
  3. Analysis of Ackerman Mechanism, Proceedings of National Conference on Advances in Automotive Technology (NCAAT-2010), Department of Automobile Engineering, Rajalakshmi Engineering College, Thandalam, Chennai, 15-16 July, 2010.
  4. Optimizing the Angle of Bell Crank Lever of Ackerman Steering Mechanism, Proceedings of Tenth National Conference on Industrial Problems on Machines and Mechanisms (IPRoMM 2010), MNIT, Jaipur, Rajsthan, India, 17-18 December, 2010, pp. 99-104.
  5. Design and Development of New Steering Mechanisms, Proceedings of National Conference On Recent Advances In Mechanical Engineering (NCRAME), R.V.R. & J. C. College of Engineering, Guntur, July 7 - 8, 2011, pp. 311-315.

 

MH

B.Tech: - Mechanical Engineering, Osmania University, Hyderabad, 1992
M.Tech:
- Thermal Engineering, JNTU Hyderabad, 2001
Ph.D.:
- Pursuing, BITS Hyderabad

Mr. Manzoor Hadi
Associate Professor,
Mechanical Engineering Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 21 years
Industry Experience - 5 years

Professional Affiliations

  1. ISTE

Academic & Professional accomplishments:

  1. No. of B.Tech. project guided: 25
  2. No. of international journal & international conference publications:

Fields of Specialization:

  1. Thermal

Fields of interest:

  • Sustainable Engineering
  • Heat Transfer
  • R&AC

 

B.Tech: - Production Engineering - V.R.Siddhartha Engineering College, 2003
M.Tech:
- Manufacturing Engineering And Automation, Govt.College of Engineering -2005Ph.D.: - Pursuing, BITS Hyderabad

Mr. M. Trivikrama Sankar
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 9 years

Academic & Professional accomplishments:

  1. No. of B.Tech. project guided: 9

Fields of Specialization:

  1. Manufacturing Engineering And Automation

Fields of interest:

  1. Production
  2. Advanced Materials

 

B.Tech: - Mechanical Engineering, PBR VITS, JNTU Anantapur, 2008
M.Tech:
-CAD/CAm,CREC, JNTU Anantapur, 2012

Mr. P. Lokesh
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 5 years 6 months (along with Industrial experience)

Academic & Professional accomplishments:

  1. No.of B.Tech. project guided: 4

Fields of Specialization:

  1. CAD/CAM

Fields of interest:

  1. Analysis
  2. FEM

 

B.Tech: - Mechanical Engineering,B.V.C.Engineering college, Odelarevu, 2006
M.Tech:
-Advanced Manufacturing Systems,JNTU-Hyderabad, 2009
Ph.D.:
- Pursuing, JNTU Kakinada

Mr. B. Vijay Kiran
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 8 years

Academic & Professional accomplishments:

  1. No. of B.Tech. project guided: 5
  2. No. of international journal & international conference publications:2

Fields of Specialization:

  1. Advanced Manufacturing Systems

Fields of interest:

  1. Metal Forming
  2. FEM with Metal Cutting
  3. Composites

Research Papers Published

  1. "COMPOSITE PRESSURE VESSELS" Published in International Journal of Engineering Research and Technology, Volume-2, Issue 1.January 2013.
  2. "TESTING THE FLEXURAL FATIGUE BEHAVIOR OF E-GLASS EPOXY LAMINATES" published in International Journal of Research in Engineering and Technology(IJRET), Volume 3, Issue 8; August 2014.

 

B.Tech: - Mechanical Engineering, Adams Engineering college, Paloncha, 2005
M.Tech:
- Design Engineering, Kakatiya Institute of Technology & Science, Warangal, 2011

Mr. D. V. R. Praveen
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 6 years 5 months

Professional Affiliations

  1. MISTE

Academic & Professional accomplishments:

  1. No. of B.Tech. project guided: 6
  2. No. of international journal & international conference publications: 1

Fields of Specialization:

  1. Design Engineering

Fields of interest:

Engineering Design

Research Papers Published

  1. "TESTING THE FLEXURAL FATIGUE BEHAVIOR OF E-GLASS EPOXY LAMINATES" published in International Journal of Research in Engineering and Technology(IJRET), Volume 3, Issue 8; August 2014

 

B.Tech: - Mechanical Engineering, Aurora’s Engineering College, 2009
M.Tech:
- CAD/CAM, Holy Mary Institute of Technology and Science, 2012

Mr. S. Ravinder Reddy
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 3 years 10 months

Academic & Professional accomplishments:

  1. No. of B.Tech. project guided: 2
  2. No. of international journal & international conference publications:2

Fields of Specialization:

  1. CAD/CAM

Fields of interest:

  1. Mechanics of Materials
  2. Finite Element Methods

Technical Paper presentations:

  1. High velocity impact on composite panels of fiber reinforced plastics using FEM analysis S.R. Reddy, C L Kumar, NJ Kumar and P. JanakiRamulu Proceedings of 1st KIIT International Symposium on ADVANCES IN AUTOMOTIVE TECHNOLOGY page (36-41)
  2. A statistical study on supply chain in iron foundary C L Kumar, S.R. Reddy, NJ Kumar and P. JanakiRamulu Proceedings of 1st KIIT International Symposium on ADVANCES IN AUTOMOTIVE TECHNOLOGY page (33-35)

 

B.Tech: - Mechanical Engineering, KITS, Warangal, 2008
M.S.:
-Automotive Engineering, University of Hertfordshire, UK,2010

Mr N. Kiran Kumar
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 3 years 3 months

Academic & Professional accomplishments:

  1. No. of B.Tech. project guided: 1

Fields of Specialization:

  1. Automotive Engineering

Fields of interest:

  1. Automotive Engineering

 

B.Tech: - Mechanical Engineering, NEC,Narasaraopet, 2008
M.Tech:
- AMS, SVITS, Mahaboob Nagar, 2012

Mr. P. Naresh Kumar Reddy
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 5 years

Professional Affiliations

  1. MISTE

Academic & Professional accomplishments:

  1. No. of B.Tech. project guided: 3
  2. No. of international journal & international conference publications: 2

Fields of Specialization:

  1. Production

Fields of interest:

  1. Optimization of Machining Processes
  2. Ecofriendly nano cuttingfluids in Machining Operations

Research Papers Published

  1. Naresh Kumar Reddy.P, Mahesh.M, and Murali Krishna.K, Optimization of Machining parameters in Electric Discharge Maching using Response Surface Methodology. IJETMAS, 2014, VOL.2 Issue 7, 89-99.
  2. Naresh Kumar Reddy.P and Mahesh.M, Determination of Optimal Cuting conditions using Design of Experiments and Optimization Techniques. IJERT, 2012, VOL.1 Issue 10, 1-10.

 

B.E.: - Mechanical Engineering,KIT,Tiptur,Karnataka, 2009
M.Tech:
-Production Engineering and System Technology,National Institute of Engineering,Karnataka,2011

Mr. Waseem Ahamed
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 3 years

Professional Affiliations

  1. IAENG

Academic & Professional accomplishments:

  1. No. of B.Tech. project guided: 1

Fields of Specialization:

  1. Production

Fields of interest:

  1. Production

 

B.Tech: - Mechanical Engineering, Vignan Institute Information Technology, 2010
M.Tech:
- Manufacturing Engineering, NIT, Warangal, 2012

Mr. P. Anil Babu
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 2 years

Academic & Professional accomplishments:

  1. No. of B.Tech. project guided:1

Fields of Specialization:

  1. Manufacturing Engineering

Fields of interest:

  1. Production

 

B.Tech: - Mechanical Engineering, D.V.R. College of Engineering and Technology, 2007
M.Tech:
- Manufacturing Technology,NIT Calicut, 2009
Ph.D.:
- Advanced Machining Process, NIT Warangal, 2015

Dr. A. Varun
Associate Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 6 years 4 months 

Academic & Professional accomplishments:

  1. No. of B.Tech. project guided: 1
  2. No. of international journal & international conference publications:4

Fields of Specialization:

  1. Advanced Machining Process

Fields of interest:

  1. Multi objective Optimization
  2. Advanced Machining Process
  3. Computer Aided Engineering

Research Papers Published

  1. Varun, A., Venkaiah, N., (2015) Simultaneous optimization of WEDM responses using 
grey relational analysis coupled with genetic algorithm, International Journal of 
Advanced Manufacturing Technology, 76 (1-4) 675-690 (SCI, Impact Factor: 1.779).
  2. Varun, A., Venkaiah, N., (2015) Grey Relational Analysis coupled with Firefly Algorithm for Multiobjective Optimization of Wire Electric Discharge Machining, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering 
Manufacture, 229 (8) 1385-1394. (SCI, Impact Factor: 0.661).

Technical Paper presentations:

  1. Varun A., Venkaiah N., Kotiveerachari B., (2010) Single Discharge Analysis of Electric Discharge Turning, Proc. of the 4th International Conference on Advances in Mechanical Engineering, S.V. National Institute of Technology, Surat, Gujarat, India, 579-583
  2. Varun, A., Venkaiah, N., Kotiveerachari, B., (2012) Multi-Objective Optimization of Powder Mixed EDM, All India Manufacturing Technology, Design and Research (25th AIMTDR), Jadavpur University, December 14-16, 453-459

 

VS.T

B.E.: - Mechanical Engineering, Osmania University, Hyderabad, 2006
M.E.:
- Turbo Machinary, Osmania University, Hyderabad, 2009

Mr. T. Vijaya Sarathi
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 5 years
Industrial Experience – 1 year
 

Academic & Professional accomplishments:

  1. No. of B.Tech. project guided: 5

Fields of Specialization:

  1. Turbo Machinery
  2. Thermal Engineering
  3. Fluid Mechanics

Fields of interest:

  1. Heat Transfer
  2. Nano Fluids
  3. Micro-Scale Heat Transffer and Fluid Flow
  4. Combustion in IC engines
  5. Alternative Fuels
  6. Design of Steam Turbines and Gas Turbines

Work Shop Attended:

  1. Fluid Mechanics, IIT KANPUR, May-2014
  2. Material Charecterization, National Conference, 2013

 

RSR.K

B.Tech: - Mechanical Engineering, S.K.D engineering college, gooty, 2010
M.Tech:
- Thermal Engineering, JNTUA, 2014

Mr. K. Rama Siva Reddy
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 1 Year
Industrial Experience – 1 Year

Academic & Professional accomplishments:

  1. No. of B.Tech. project guided: 

Fields of Specialization:

  1. Thermal Engineering

Fields of interest:

  1. IC Engines
  2. Thermal Engineering

 

K.J

B.Tech: - Mechanical Engineering, Basaveshwara Engineering College, Karanataka, 2005
M.Tech:
- Thermal Engineering and System Technology, Karanataka, 2012

Mr. J. Kanteyya
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 6 years

Academic & Professional accomplishments:

  1. No. of B.Tech. project guided: 5

Fields of Specialization:

  1. Thermal Engineering

Fields of interest:

  1. Thermal Engineering
  2. Heat and Mass Transfer
  3. Cryogenics

Reasearch Paper Published:

  1. Published research paper titled ‘’Performance analysis for natural draft cooling tower and chimney through Numerical simulation’’ in IJIRSET,Volume4 issue 3, march 2015.

  

VK.P

B.Tech: - Mechanical Engineering, JNTUH, 2009
M.Tech:
- Design Engineering, IIT, Hyderabad, 2012

Mr.P. Vinay Kumar
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 3 years
Industrial Experience – 1 years

Academic & Professional accomplishments:

  1. No. of B.Tech. projects guided: 2
  2. No. of international journal & international conference publications:1

Fields of Specialization:

  1. Design Engineering
  2. Mechanics of Solids
  3. Design of Machine Members

Fields of interest:

  1. Analysis of Knee joint
  2. Rapid Prototyping

Research Papers Published

  1. “Analysis of Knee Joint” P. Vinay Kumar1, Assistant Professor, SRIIT Hyderabad and Dr.S. Surya Kumar2, Assistant Professor, IIT Hyderabadin International Journal of Research & Applications (July-Sep 2014)Volume 1, Issue 3; pages 69-71.

Technical Paper Presentations:

  1. “Analysis of Knee Joint” 1st International Conference on Emerging Trends in Engineering and Technology (ICETET-2014), held during 29th - 30th September 2014 in Warangal, Telangana, India.

 

SB.B

B.Tech: - Mechanical Engineering, V. R. Siddhartha Engineering College, Vijayawada, 2006
M.Tech:
- Thermal Engineering,NIT Tiruchirapalli, 2011

Mr. B. Syam Babu
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 5 years

Academic & Professional accomplishments:

    No. of B.Tech. project guided: 3

Fields of Specialization:

    Thermal Engineering

Fields of interest:

    Thermal

 

v.v

B.Tech: - Mechanical Engineering, JNTU Kakinada, 2010.
M.Tech:
- Engineering Design, JNTU Hyderabad, 2015.

Mr. V. Veeranna 
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 1 years

Academic & Professional accomplishments:

  1. No. of international journal & international conference publications: 1

Fields of Specialization:

  1. Design

Fields of interest:

  1. Design

 

R.A

B.Tech: - Mechanical Engineering, GokaRaju RangaRaju Institute of Engineering & Technology, Hyderabad, 2013
M.E.:
- Heat Power, BIT Ranchi, 2015

Mr. Ande Raghu
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 1 years

Academic & Professional accomplishments:

    No. of B.Tech. project guided: 0

Fields of Specialization:

    Thermal Engineering

Fields of interest:

    Thermal, CFD

 

S.M

B.Tech: - Mechanical Engineering, Maharashtra College of Engineering, Latur, 2007
M.Tech:
- Manufacturing Technology,NIT Calicut, 2010
Ph.D.:
- Manufacturing Technology,NIT Warangal, 2016

Mr.M.Sandeep Kumar
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 2 years

Academic & Professional accomplishments:

    No. of B.Tech. project guided: 01

Fields of Specialization:

    Nanotechnology, Machining
    Eco-Friendly Cutting Fluids
    Manufacturing Technology

Fields of interest:

    Manufacturing

Research Papers Published

  1. Mechiri Sandeep Kumar, V Vasu, A Venu Gopal,"Thermal conductivity and rheological studies for Cu–Zn hybrid nanofluids with various basefluids",Journal of the Taiwan Institute of Chemical Engineers,2016 (SCI, Impact Factor: 3.00)
  2. Mechiri Sandeep Kumar, V Vasu, A Venu Gopal,"Thermal Conductivity and Viscosity of Vegetable Oil–Based Cu, Zn, and Cu–Zn Hybrid Nanofluids",Journal of Testing and Evaluation,Vol. 44, No. 3, 2016, pp. 1077-1083 (SCI, Impact Factor: 0.45)
  3. Mechiri Sandeep Kumar, V Vasu, A Venu Gopal,"Thermal Conductivity of Cu-Zn Hybrid Newtonian Nanofluids: Experimental Data and Modeling using Neural Network",Procedia Engineering,Volume 127, 2015, Pages 561-567 (Elsevier)

List of Non Teaching Staff