This email address is being protected from spambots. You need JavaScript enabled to view it. | 08458 - 222000

EAMCET| ICET| ECET| CODE: BVRI| PGECET| CODE: BVRI1

Welcome to BVRITN

Mechanical Engineering Teaching Faculty

B.Tech: - Mechanical Engineering, Nagarjuna University, 1991
M.Tech:
- Thermal Engineering, JNTU Hyderabad, 1996
Ph.D.:
- Heat Transfer, JNTU Hyderabad, 2008

Dr. V. Murali Krishna
Professor and Head,
Mechanical Engineering Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience:  24 years (along with R&D) 

Contact Number:  +91 9848419441 

BVRITN Employee ID: 385 

JNTUH Registration ID: 87150405-172820

Professional Affiliations

  1. MISTE
  2. ASME

Awards and Recognition:

  1. Best Researcher award for the academic year 2007-2008 at G.V.P. College of Engineering, Visakhapatnam.
  2. Selected for Marquis Who's Who in the World 2011 for Publication of papers in international referred Journals such as American Society of Mechanical Engineering (ASME) Journal of Heat Transfer, USA and International Journal of Heat Mass Transfer, Elsevier, U.K.
  3. Editorial board number member for the international journals published by Science Publishing Group System, USA
  4. Reviewer for International Journal of Heat and Mass Transfer and Fuel published by Elsevier Publications, U.K.

Academic & Professional accomplishments:

  1. Currently guiding 2 Ph.D. Students
  2. No. of B.Tech. projects guided: 45
  3. No. of international journal& international conference publications:16

Fields of Specialization:

  1. Thermal Engineering
  2. Heat Transfer

Fields of interest:

  1. Heat Transfer by Condensation in the presence of Non- Condensable Gas
  2. Electronic Cooling
  3. Nano-fluids
  4. Micro-Scale Heat Transfer and Fluid Flow
  5. Combustion in I.C. Engines
  6. Alternative Fuels

Research Papers Published

  1. “Heat transfer enhancement by using cuo-water nanofluid in a concentric tube heat exchanger- an experimental study" International Journal of Mechanical Engineering,Vol. 6, Issue 1, Dec - Jan 2017, pp.11-20, ISSN: 2319-2259.
  2. “Experimental investigation of heat transfer enhancement by using Al2O3-water nanofluid in a concentric tube heat Exchanger" International Journal of Mechanical Engineering and Technology, Vol. 7, Issue 6, Nov-Dec, 2016, pp:449-458, ISSN:0976-6340.
  3. “Enhancement of Heat Transfer in Forced Convection by using Fe2O3-Water Nanofluid in a Concentric Tube Heat Exchanger" International Journal of Engineering and Innovative Technology,Vol.6, Issue 5, November 2016, pp.102-107, ISSN: 2277-3754.
  4. “Heat Transfer Enhancement by using ZnO-Water Nanofluid in a Concentric Tube Heat Exchanger under Forced Convection Conditions" International Journal of Innovations in Engineering and Technology,Vol.7, Issue 4, 2016, pp. 177-184, ISSN: 2319-1058.
  5. "Experimental study on condensation of humid air in laminar flow in a vertical channel" (Article No: HTR-7475), Journal of Heat Transfer Research.Accepted for Publication
  6. "Convective condensation of vapor in laminar flow in a vertical parallel plate channel in the presence of a high con-centration non-condensable gas" ASME Journal of Heat Transfer; American Society of Mechanical Engineering, U.S.A; Jan, 2009 Vol. No. 131 pp. 011502-1-7
  7. "Convective condensation of vapor in the presence of a non-condensable gas of high concentration in laminar flow in a vertical pipe" International Journal of Heat and Mass Transfer; Elsevier United Kingdom; Dec, 2008 Vol. 51, pp. 6090-6101
  8. “A theoretical study on convective condensation of water vapor from humid air in turbulent flow in a vertical duct” ASME Journal of Heat Transfer;American Society of Mechanical Engineering, U.S.A; Dec, 2007 Vol. No.129,pp. 1627-1637

International Conferences Preceedings:

  1. "Modeling and Analysis of an Automobile Ladder Chassis Frame" National Conference on Recent Innovations in Mechanical and Manufacturing Engineering, BVRIT, Narsapur, India, ISBN : 978-93-85100-45-1, pp.108-113.
  2. "Design, Installation and Testing of A Two-stage Solar Concentrator for Extremely High Temperature Applications" National Conference on Recent Innovations in Mechanical and Manufacturing Engineering, BVRIT, Narsapur, India, ISBN: 978-93-85100-45-1, pp.125-128.
  3. "Design and Analysis of a Regenerative Evaporative Air Cooling System" National Conference on Recent Innovations in Mechanical and Manufacturing Engineering, BVRIT, Narsapur, India, ISBN : 978-93-85100-45-1, pp.121-124.
  4. "Pressure Drop and Deposition Rate in Chemical Vapor Deposition – A Theoretical Study on Effect Of System Parameters"; 4-6,January, 2010;20 th National &9th ISHMT–ASME Heat and Mass Transfer conference. IIT, Bombay, India.
  5. "Experimental Study on Condensation of Water Vapor in The Presence of High Concentration Non-Condensable Gas In Laminar Flow in a Vertical Channel"; 4-6,January, 2010;20 th National &9th ISHMT–ASME Heat and Mass Transfer conference. IIT, Bombay, India.
  6. "Convective Heat Transfer Characteristics of Sisal-Water Nanofluid in a Shell and Coil"; 27-29, Dec. 2008; 4th BSME-ASME international conference on thermal engineering.
  7. "Theoretical Analysis on Pressure Drop and Heat Transfer in Laminar Flow of a Pseudoplastic Fluid through a Pipe"; 15-17, December, 2008; International conference on Advances in Mechanical Engineering NIT, Surat, India
  8. "Condensation of vapor in laminar flow in a pipe in the presence of a non-condensable gas of high concentration - A heat and mass transfer analysis"; January 3 – 5, 2008; 19th National &8th ISHMT –ASME Heat and Mass Transfer conference. JNTU, Hyderabad, India
  9. "Condensation of Vapor in the Presence of a High Concentration Non-Condensable Gas in a Horizontal Parallel Plate Channel under Turbulent flow Conditions"; January 3 – 5, 2008; 19th National &8th ISHMT –ASME Heat and Mass Transfer conference. JNTU, Hyderabad, India
  10. “Condensation of Vapor in the Presence of a High Concentration Non-Condensable Gas during Laminar Flow of Air over a Flat Plate” Held in ITALY; January 4 – 6, 2006; ISHMT–ASME Heat and Mass Transfer conference. IIT Guwahati, India

 

Dr. Y. Krishna Reddy, M.Tech(IITKGP), Ph.D

B V Raju Institute of Technology, Narsapur

This email address is being protected from spambots. You need JavaScript enabled to view it.  
+91 7337411184

Dr. Y. Krishna Reddy, the Principal of B. V. Raju Institute of Technology, Vishnupur, Narsapur, Medak District as earlier worked as professor of Mechanical Engineering CBIT, Hyderabad. He did his graduation from JNTUA, Anantapur(1976-81) and post-graduation from IIT Kharagpur (1981-83). He pursed his doctoral and research work at IIT Kharapur on fill time basis for 3 years on lien from CBIT. He had worked for two years in US on software projects. He has a passion for teaching. He is a life long learner. Learnt and taught many programming languages and CAD packages for Mechanical Engineering students. He was instrumental in computerization of academic & exam cell and controller of exams activities of CBIT.

Some highlights of his career are:

  1. Over 33 years of teaching, research and administrative experience and the entire service in CBIT, Hyderabad.
  2. Worked as Principal of one Engineering College in Prakasam District, AP affiliated to JNTUK, Kakinada for two years from Jan 2013 to Jan 2015 on lien from CBIT.
  3. Ratified as Principal by JNTUK, Kakinada in Mar 2014.
  4. Pursued research work at IIT Kharagpur for 3 years on full time basis as an Institute scholar on study leave from CBIT (1989-92).
  5. M.Tech (Mech.Handling) from IIT Kharagpur (1981 – 83).
  6. Published papers in international journals (published from Germany), and in Indian Journal of Institution of Engineers (India).
  7. Presented/submitted papers at International conferences jointly held by American Society of Mechanical Engineers (ASME) and Japanese Society of Mechanical Engineers (JSME) held in USA.
  8. Worked as SAP Technical Consultant.
  9. Worked in Software industry in USA on H1B visa for about two years (2000-2001).
  10. Responsible for the development and implementation of software package for Academic section and Office of the Controller of Examinations (COE) of CBIT.
  11. Participated in Mission 10X workshop conducted by WIPRO and certified as Mission10X Learning Approach Practitioner.
  12. Participated in a one-week workshop on “Management Capacity Enhancement Programme for Administrators” at IIM Lucknow (Noida Campus) under TEQIP-II.
  13. Attended Workshops on “Outcome Based Engineering Education” and “Redesigning Curriculum in the context of Outcome Based Learning” organized by JNTUK, Kakinada.
  14. Professor-in-Charge of Academic & Exam Cell, CBIT for over 8 years.
  15. Member of Finance Committee of CBIT for two years.
  16. Member of NBA, NAAC, and NIRF teams.
  17. Fellow of Institution of Engineers, FIE.
  18. Life Member of Indian Society for Technical Education (LM-ISTE).
  19. Sportsman and won several prizes and medals at school, college, UG, PG and Ph.D. levels. Represented IITKGP in inter IIT sports meets.

 

MH


Ph.D.:
- Pursuing, BITS Hyderabad
M.Tech:
- Thermal Engineering, JNTU Hyderabad, 2001
B.E.:
- Mechanical Engineering, Osmania University, Hyderabad, 1992

Mr. Manzoor Hadi
Associate Professor,
Mechanical Engineering Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  19 years 

Teaching Experience:  5 years 

Contact Number:  +91 9849613506 

BVRITN Employee ID: 401 

JNTUH Registration ID: 58150406-113708 

Professional Affiliations

  1. ISTE

Academic & Professional accomplishments:

  1. No. of B.Tech. projects guided: 45
  2. No. of international journal & international conference publications:

Fields of Specialization:

  1. Thermal

Fields of interest:

  • Sustainable Engineering
  • Heat Transfer
  • R&AC

 


M.Tech:
- Manufacturing Engineering And Automation, Govt.College of Engineering -2005
B.Tech:
- Production Engineering - V.R.Siddhartha Engineering College, 2003

Mr. M. Trivikrama Sankar
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  9 years 

Contact Number:  +91 9492234696 

BVRITN Employee ID:  454 

JNTUH Registration ID:   70150404-150437 

Academic & Professional accomplishments:

  1. No. of B.Tech. projects guided: 9

Fields of Specialization:

  1. Manufacturing Engineering And Automation

Fields of interest:

  1. Production
  2. Advanced Materials

 


M.Tech:
- Design For Manufacturing, JNTUH,2006
B.Tech.:
- Mechanical Engineering, VJIT, 2003

Mrs. A. Haritha Reddy
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  6 years 

Contact Number:  +91 9701487777  

BVRITN Employee ID:  419 

JNTUH Registration ID:  94150407-155606  

Academic & Professional accomplishments:

  1. No. of B.Tech Projects guided: 6
  2. No. of international journal & international conference publications: 2

Fields of Specialization:

    Optimization Techniques
    Convective Heat Transfer of nano fluids

Fields of interest:

  1. Design for Manufacturing
  2. Production Planning
  3. Operations Research

Research Papers Published

  1. G.Keerthi and A.Haritha Reddy, "Free Vibration Analysis of four bar mechanism" - RIMME 2016, pg no:94, ISBN 978-93-85100.
  2. Dr.V.Murali Krishna, Manzoor Hadi and A.Haritha Reddy, "Design and analysis of a regenerative Evaporative cooling system" - RIMME 2016, pg no:121, ISBN 978-93-85100.

 


M.Tech:
- AMS, JNTU, Hyderabad, 2004
B.E.:
- Mechanical Engineering, CBIT, Gandipet, 1999

Mrs. M. Sireesha
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  10 years 

Contact Number:  +91 9949996605 

BVRITN Employee ID: 513 

JNTUH Registration ID:   0615-0406-122404 

Academic & Professional accomplishments:

  1. No.of B.Tech. projects guidance: 5

Fields of Specialization:

  1. Advanced Manufacturing Systems

Fields of interest:

  1. Production

 


M.Tech:
-CAD/CAM,CREC, JNTU Anantapur, 2012
B.Tech:
- Mechanical Engineering, PBR VITS, JNTU Anantapur, 2008

Mr. P. Lokesh
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:
4 years
Contact Number:
+91 9704713479
BVRITN Employee ID:
527
JNTUH Registration ID:
75150404-123138

Academic & Professional accomplishments:

  1. No.of B.Tech. projects guided: 4

Fields of Specialization:

  1. CAD/CAM

Fields of interest:

  1. Analysis
  2. FEM

 


Ph.D.:
- Pursuing, JNTU Kakinada
M.Tech:
-Advanced Manufacturing Systems,JNTU-Hyderabad, 2009
B.Tech:
- Mechanical Engineering,B.V.C.Engineering college, Odelarevu, 2006

Mr. B. Vijay Kiran
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

br /Teaching Experience:  7 years 
Contact Number:  +91 9908676630 

BVRITN Employee ID: 538 

JNTUH Registration ID:   93150404-202634 

Academic & Professional accomplishments:

  1. No. of B.Tech. projects guided: 5
  2. No. of international journal & international conference publications:6

Fields of Specialization:

  1. Advanced Manufacturing Systems

Fields of interest:

  1. Metal Forming
  2. FEM with Metal Cutting
  3. Composites

Research Papers Published

  1. "Fracture and Fatigue behavior of E-Glass Epoxy Laminated Composites incorporated with Nan fillers-A Review" in National Conference“Technological Advancements in Mechanical Engineering”(TAME-16) from 22nd and 23rd July 2016.
  2. “Fatigue behavior of E-Glass fiber Laminated composite with Epoxy resin- An Experimental Approach” in a National conference on “Recent Innovations in Mechanical and Manufacturing engineering (RIMME)” on 21st and 22nd April 2016.RIMME-2016 held at B.V.R.I.T., Narasapur.
  3. “Advances in Super Plastic Forming” in a National conference on “Recent Innovations in Mechanical and Manufacturing engineering (RIMME)” on 21st and 22nd April 2016.RIMME-2016 held at B.V.R.I.T., Narasapur.
  4. “Interfacial Behavior of composites of polymer and sugarcane fiber” in International Journal of Innovative Research in Advanced Engineering, Volune-2, Issue 07, July 2015.
  5. "TESTING THE FLEXURAL FATIGUE BEHAVIOR OF E-GLASS EPOXY LAMINATES" published in International Journal of Research in Engineering and Technology(IJRET), Volume 3, Issue 8; August 2014.
  6. "COMPOSITE PRESSURE VESSELS" Published in International Journal of Engineering Research and Technology, Volume-2, Issue 1.Dec 2012.

 


M.Tech:
- CAD/CAM, Holy Mary Institute of Technology and Science, 2012
B.Tech:
- Mechanical Engineering, Aurora’s Engineering College, 2009

Mr. S. Ravinder Reddy
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  4 years 

Contact Number:  +91 8500673708 

BVRITN Employee ID: 570 

JNTUH Registration ID:  69150405-184413 

Academic & Professional accomplishments:

  1. No. of B.Tech. projects guided: 2
  2. No. of international journal & international conference publications:2

Fields of Specialization:

  1. CAD/CAM

Fields of interest:

  1. Mechanics of Materials
  2. Finite Element Methods

Technical Paper presentations:

  1. High velocity impact on composite panels of fiber reinforced plastics using FEM analysis S.R. Reddy, C L Kumar, NJ Kumar and P. JanakiRamulu Proceedings of 1st KIIT International Symposium on ADVANCES IN AUTOMOTIVE TECHNOLOGY page (36-41)
  2. A statistical study on supply chain in iron foundary C L Kumar, S.R. Reddy, NJ Kumar and P. JanakiRamulu Proceedings of 1st KIIT International Symposium on ADVANCES IN AUTOMOTIVE TECHNOLOGY page (33-35)

 


M.S.(U.K.):
-Automotive Engineering, University of Hertfordshire, UK,2010
B.Tech:
- Mechanical Engineering, KITS, Warangal, 2008

Mr N. Kiran Kumar
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 3 years
Contact Number:  +91 8106713553 

BVRITN Employee ID: 568  

JNTUH Registration ID:   04150406-102518 

Academic & Professional accomplishments:

  1. No. of B.Tech. projects guided: 4

Fields of Specialization:

    Automotive Engineering

Fields of interest:

    Automotive Engineering

 


M.Tech:
- AMS, SVITS, Mahaboob Nagar, 2012
B.Tech:
- Mechanical Engineering, NEC,Narasaraopet, 2008

Mr. P. Naresh Kumar Reddy
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  6 years 

Contact Number:  +91 9701340903 

BVRITN Employee ID: 579 

JNTUH Registration ID:  02150404-180645 

Academic & Professional accomplishments:

  1. No. of B.Tech Projects guided: 9
  2. No. of international journal & international conference publications: 2

Fields of Specialization:

    Advanced Manufacturing Systems

Fields of interest:

  1. Optimization of Machining Processes
  2. Ecofriendly nano cuttingfluids in Machining Operations

Research Papers Published

  1. Naresh Kumar Reddy.P, Mahesh.M, and Murali Krishna.K, Optimization of Machining parameters in Electric Discharge Maching using Response Surface Methodology. IJETMAS, 2014, VOL.2 Issue 7, 89-99.
  2. Naresh Kumar Reddy.P and Mahesh.M, Determination of Optimal Cuting conditions using Design of Experiments and Optimization Techniques. IJERT, 2012, VOL.1 Issue 10, 1-10.

 


M.Tech:
-Production Engineering and System Technology,National Institute of Engineering,Karnataka,2011
B.E.:
- Mechanical Engineering, KIT, Tiptur, Karnataka, 2009

Mr. Waseem Ahamed
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  4 years 

Contact Number:  +91 8500696336 

BVRITN Employee ID: 585 

JNTUH Registration ID:  66150404-171723 

Professional Affiliations

  1. IAENG

Academic & Professional accomplishments:

  1. No. of B.Tech. projects guided: 3
  2. No. of international journal & international conference publications: 1

Fields of Specialization:

  1. Production

Fields of interest:

  1. Production

Research Papers Published

  1. Waseem Ahamed, "An Observation on Performance of IC engines by using Gas Harvester for Exhaugst Energy", IJMPE, 2015, VOL.3 Issue 2.

 


M.Tech:
- Manufacturing Engineering, NIT, Warangal, 2012
B.Tech:
- Mechanical Engineering, Vignan Institute Information Technology, 2010

Mr. P. Anil Babu
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  5 years 

Contact Number:  +91 9985131144 

BVRITN Employee ID:  599 

JNTUH Registration ID:  76150406-095442 

Academic & Professional accomplishments:

  1. No. of B.Tech. projects guided:1

Fields of Specialization:

    Manufacturing Engineering

Fields of interest:

    Production

 


Ph.D.:
- Advanced Machining Process, NIT Warangal, 2015
M.Tech:
- Manufacturing Technology,NIT Calicut, 2009
B.Tech:
- Mechanical Engineering, D.V.R. College of Engineering and Technology, 2007

Dr. A. Varun
Associate Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  3 years 

Research Experience:  4 year 

Contact Number:  +91 9494226711 

BVRITN Employee ID: 607 

JNTUH Registration ID:  51150405-112628 

Academic & Professional accomplishments:

  1. No. of B.Tech. projects guided: 6
  2. No. of international journal & international conference publications: 4

Fields of Specialization:

  1. Advanced Machining Process

Fields of interest:

  1. Multi objective Optimization
  2. Advanced Machining Process

International Journals:

  1. Varun, A., Venkaiah, N., (2015) Simultaneous optimization of WEDM responses using 
grey relational analysis coupled with genetic algorithm, International Journal of 
Advanced Manufacturing Technology, 76 (1-4) 675-690 (SCI, Impact Factor: 1.779).
  2. Varun, A., Venkaiah, N., (2015) Grey Relational Analysis coupled with Firefly Algorithm for Multiobjective Optimization of Wire Electric Discharge Machining, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering 
Manufacture, 229 (8) 1385-1394. (SCI, Impact Factor: 0.661).

International Conferences:

  1. Varun A., Venkaiah N., Kotiveerachari B., (2010) Single Discharge Analysis of Electric Discharge Turning, Proc. of the 4th International Conference on Advances in Mechanical Engineering, S.V. National Institute of Technology, Surat, Gujarat, India, 579-583
  2. Varun, A., Venkaiah, N., Kotiveerachari, B., (2012) Multi-Objective Optimization of Powder Mixed EDM, All India Manufacturing Technology, Design and Research (25th AIMTDR), Jadavpur University, December 14-16, 453-459

National Conferences:

  1. Varun. A, (2016), Multi-Objective Optimization of Wire Electric Discharge Machining using a Grey Relational Analysis coupled with Firefly Algorithm while machining Hastelloy C 276, National Conference on Recent Innovations in Mechanical and Manufacturing Engineering (RIMME-2016) 21st & 22nd April, 2016, ISBN : 978-93- 85100-45-1.

 

VS.T


M.E.:
- Turbo Machinary, Osmania University, Hyderabad, 2009
B.E.:
- Mechanical Engineering, Osmania University, Hyderabad, 2006

Mr. T. Vijaya Sarathi
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  5 years 

Industrial Experience:  1 year 

Contact Number:  +91 9348245024 

BVRITN Employee ID: 639 

JNTUH Registration ID:  55150405-192428 

Academic & Professional accomplishments:

  1. No. of B.Tech. projects guided: 5

Fields of Specialization:

  1. Turbo Machinery
  2. Thermal Engineering
  3. Fluid Mechanics

Fields of interest:

  1. Heat Transfer
  2. Nano Fluids
  3. Micro-Scale Heat Transffer and Fluid Flow
  4. Combustion in IC engines
  5. Alternative Fuels
  6. Design of Steam Turbines and Gas Turbines

Work Shop Attended:

  1. Computational Research Techniques using MATLAB, NIT Warangal, December-2016
  2. Fluid Mechanics, IIT KANPUR, May-2014
  3. Material Charecterization, National Conference, 2013

 

RSR.K


M.Tech:
- Thermal Engineering, JNTUA, 2014
B.Tech:
- Mechanical Engineering, S.K.D engineering college, gooty, 2010

Mr. Kopppala Rama Siva Reddy
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience – 2 Year
Industrial Experience – 1 Year
Contact Number:  +91 9493035689 

BVRITN Employee ID: 649 

JNTUH Registration ID:   3581150408153105  

Academic & Professional accomplishments:

  1. No. of B.Tech. projects guided:1 

Fields of Specialization:

    Thermal Engineering

Fields of interest:

  1. IC Engines
  2. Thermal Engineering

 

SB.B


M.Tech:
- Thermal Engineering,NIT Tiruchirapalli, 2011
B.Tech:
- Mechanical Engineering, V. R. Siddhartha Engineering College, Vijayawada, 2006

Mr. B. Syam Babu
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  6 years 

Contact Number:  +91 9618368892 

BVRITN Employee ID: 669  

JNTUH Registration ID:   5105-150502-194517 

Academic & Professional accomplishments:

    No. of B.Tech. projects guided: 6

Fields of Specialization:

    Thermal Engineering

Fields of interest:

  1. Thermal Engineering
  2. Fluid Mechanics
  3. Heat Transfer

 

k.g


M.Tech:
- CADCAM, V V I T, Chevella, 2013.
B.Tech:
- Production Engineering, DVRCET, SangaReddy,2004.

Mrs. G. Keerthi 
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  4 years 

Contact Number:  +91 8341517877  

BVRITN Employee ID:  731 

JNTUH Registration ID:   7263-160222-183211 

Academic & Professional accomplishments:

  1. No. of B.Tech. projects guided: 8

Fields of Specialization:

  1. Production Engineering

Fields of interest:

  1. Composites
  2. Production

 

R.A

B.Tech: - Mechanical Engineering, GokaRaju RangaRaju Institute of Engineering & Technology, Hyderabad, 2013
M.E.:
- Heat Power, Birla Institute of technology, Mesra 2015

Mr. Ande Raghu
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  2.6 years 

Contact Number:  +91 9490972896  

BVRITN Employee ID: 782 

JNTUH Registration ID:   5852-161027-203200 

Academic & Professional accomplishments:

    No. of B.Tech. projects guided: 5

Fields of Specialization:

    Thermal Engineering

Fields of interest:

  1. Thermal
  2. CFD

Research Papers Published

  1. E D Gopala Krishna, Shaik Shamshoddin, D V Raju, Raghu Ande "Effect of Cooling pattern on centrifugal casting mold stress-strain distribution through computational fluid dynamics and finite element method analysis, Journal of Mechanical Engineering science, Oct-2018,doi:10.1177/0954406218802933
  2. Gopala Krishna E D, Shaik Shamshoddin, Raghu Ande. "Numerical Simulation of Fluid Flow and Heat Transfer in a Ductile Iron Ladle during Holding and Teeming". Journal of Thermal science and Engineering Applications (ASME). Aug 2018, doi:10.1115/1.4041341.
  3. Raghu Ande, Venkata N Kumar Y 2018, Numerical Investigation on effect of Divergent angle in Convergent-Divergent Rocket engine Nozzle, Chemical engineering transactions, Vol 66, Pg 787-792, DOI: 10.3303/CET1866132

 

SK.M


Ph.D.:
- Manufacturing Technology,NIT Warangal, 2016
M.Tech:
- Manufacturing Technology,NIT Calicut, 2010
B.E.:
- Mechanical Engineering, Maharashtra College of Engineering, Latur, 2007

Dr.M.Sandeep Kumar
Associate Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  6 years 

Contact Number:  +91 7659004440 

BVRITN Employee ID: 780 

JNTUH Registration ID:  7211-150409-131146 

Academic & Professional accomplishments:

  1. No. of B.Tech. projects guided: 2
  2. No. of international journal & international conference publications: 9

Fields of Specialization:

    Nanotechnology
    Machining
    Eco-Friendly Cutting Fluids
    Manufacturing Technology

Fields of interest:

    Manufacturing

Research Papers Published International Journals

    1. M Sandeep kumar, V.Vasu, A. Venugopal, “Thermal Conductivity and Viscosity Of Vegetable Oil Based Cu, Zn And Cu-Zn Hybrid Nanofluids”, Journal of Testing and Evaluation (ASTM), 2014, 44 (3), 1077-1083 (DOI: 10.1520/ JTE20140286), Impact factor 0.644 (SCI journal).
    2. M Sandeep kumar, V.Vasu, A. Venugopal “Thermal Conductivity and Rheological Studies for Cu-Zn Hybrid Nanofluids with Various Basefluids”, Journal of the Taiwan Institute of Chemical Engineers (Elsevier), 2016, 66, 321-327 (DOI 10.1016/j.jtice.2016.05.033), Impact factor 4.217 (SCI journal).
    3. M Sandeep kumar, V.Vasu, A. Venugopal “Investigation of Thermal conductivity and Rheological Properties of Vegetable Oil Based Hybrid Nanofluids Containing Cu-Zn Hybrid Nanoparticles” Experimental Heat Transfer (T&F), 2016, 1-17 (DOI 10.1080/08916152.2016.123317), Impact factor 1.642 (SCI journal).
    4. M Sandeep kumar, V.Vasu, A. Venugopal “Thermal Conductivity of Cu-Zn Hybrid Newtonian Nanofluids: Experimental data and modelling using neural network”, Procedia Engineering (Elsevier), 2015, 127, 561 – 567 (DOI 10.2016/j.proeng .2015.11.345) (Scopus journal).
    5. M Sandeep kumar, V.Vasu, A. Venugopal “Rheological study of Cu-Zn Hybrid Newtonian Nano-fluids: Experimental data and modelling using neural network” Materials Today: Proceedings (Elsevier), 2017, 4, 1957–1963 (DOI 10.2016/ j.matpr.2017.02.041)(Scopus journal).

International Conferences

  1. M Sandeep kumar, V Vasu, A Venu Gopal, “Thermal Conductivity of Cu-Zn Hybrid Newtonian Nanofluids: Experimental data and modelling using neural network”, International Conference on Computational Heat and Mass Transfer (ICCHMT)-2015.
  2. M Sandeep kumar, V Vasu, A Venu Gopal, “Rheological study of Cu-Zn Hybrid Newtonian Nanofluids: Experimental data and modelling using neural network”, International Conference On material processing and characterization (ICMPC)-2016
  3. M Sandeep kumar, V Vasu, A Venu Gopal, “A 3-D Simulation and Experimental Study of Cutting Forces in Turning Inconel-718” International Conference on Recent Trends in Engineering and Material Sciences (ICEMS)-2016
  4. Mechiri Sandeep Kumar, V Vasu, A Venu Gopal," Investigation on Influence of Hybrid Nanofluid/MQL on Cutting Forces in Turning Inconel-718" 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016)

 


M.Tech:
- Machine Design, East West Institute of Technology,Bangalore,2014
B.E.:
- Mechanical Engineering, GNDEC,Bidar, 2012

Mr. S. Udaykumar
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  - 1 year  

Contact Number:  +91 7204893533  

BVRITN Employee ID:  732 

JNTUH Registration ID:   1098-160221-155205  

Academic & Professional accomplishments:

  1. No. of B.Tech Projects guided: 
  2. No. of international journal & international conference publications: 1

Fields of Specialization:

    Machine Design

Fields of interest:

  1. Finite Element Analysis
  2. Design of Machine Elements
  3. Strength of Materials

Research Papers Published

  1. Uday Kumar S, Rudresh M, Dr. Maruthi B. H, "Design Optimization of CAB Roof for Rops and Fops Failure" IJAEM, 2014, Vol.1 Issue 1.

 


M.Tech:
- Machine Design, IIT Guwahati, 2010
B.Tech:
- Mechanical Engineering, Mahaveer Institute of Science & Technology, Hyderabad, 2008

Mr. Ratna Kumar K
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:   5 years 

Contact Number:  +91 9985618137  

BVRITN Employee ID:  774 

JNTUH Registration ID:   2289-161028-120407 

Academic & Professional accomplishments:

  1. No. of B.Tech Projects guided: 4
  2. No. of international journal & international conference publications: 2

Fields of Specialization:

  1. Machine Design

Fields of interest:

  1. Gear Design
  2. Machines and Mechanisms
  3. Plastic Engineering

Research Papers Published

  1. Optimization of Machining parameters in Electric Discharge Maching using Response Surface Methodology. IJETMAS, 2014, VOL.2 Issue 7, 89-99.
  2. Determination of Optimal Cuting conditions using Design of Experiments and Optimization Techniques. IJERT, 2012, VOL.1 Issue 10, 1-10.

 


M.Tech:
- Machine Design, Holy Meri Institute of Technology and Science, Hyderabad, 2014
B.E.:
- Mechanical Engineering, GNDEC Bidar, 2009

Mr. Mahesh kumar Toran
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  2 years 

Industrial Experience:  3 years 

Contact Number:  +91 7353665557  

BVRITN Employee ID: 827 

JNTUH Registration ID:   6423-161226-160005 

Academic & Professional accomplishments:

  1. No. of B.Tech Projects guided: 2
  2. No. of international journal & international conference publications:

Fields of Specialization:

    Machine Design

Fields of interest:

  1. Dynamic and Model Analysis of Machines
  2. Turbo Machines
  3. Theory of Machines

 


M.Tech:
- Machine Design, VTU, 2014
B.E.:
- Mechanical Engineering, VTU, 2012

Mr. Sangameshwar Patil
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  1 year 

Contact Number:  +91 9902405558  

BVRITN Employee ID:  828 

JNTUH Registration ID:   5714-150415-143526  

Academic & Professional accomplishments:

  1. No. of B.Tech Projects guided: 1
  2. No. of international journal & international conference publications:

Fields of Specialization:

    Machine Design

Fields of interest:

  1. Finite Element Analysis
  2. Design

 


M.Tech:
- Machine design ,KLSGIT Belgavi, Karnataka ,2016
B.E.:
- Mechanical Engineering, GNDEC BIDAR 2014

Mr. Sangamesh V P
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  - 

Contact Number:  +91 9494420915  

BVRITN Employee ID:   

JNTUH Registration ID:   9954-170112-135448  

Academic & Professional accomplishments:

  1. No. of B.Tech Projects guided:
  2. No. of international journal & international conference publications:

Fields of Specialization:

    Machine Design

Fields of interest:

  1. Design
  2. Mechanics of Materials
  3. Operations Research

Research Papers Published

  1. Sangamesh, V. V. Kulkarni, "Design and Fabrication of Indexing Set Up for Drill Jig", IRJET, Volume: 03 Issue: 06,June-2016 6984-6991.

 


M.Tech:
- Machine Design, BEC Bagalkot, 2015
B.E.:
- Mechanical Engineering, GNDEC,Bidar, 2013

Mr. Ravikant B Mulage
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  - 

Contact Number:  +91 8951542247  

BVRITN Employee ID:   

JNTUH Registration ID:   3854-170122-112013  

Academic & Professional accomplishments:

  1. No. of B.Tech Projects guided: 0
  2. No. of international journal & international conference publications: 1

Fields of Specialization:

    Machine Design

Fields of interest:

  1. Strength of Materials
  2. Composite Materials

Research Papers Published

  1. Ravikant.B, Shravan Kerur, and Nagappa Siddagonde, Numerical Analysis of low velocity impact on woven fabric laminated composite plates. IJIRSET, 2015, Vol.4 Issue 8, 6984-6991.

 


M.Tech:
- Machine design ,KLSGIT Belgavi, Karnataka ,2016
B.E.:
- Mechanical Engineering, SDMCET Dharwad,Karnataka,2014

Mr. Akshay Kulkarni
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  - 

Contact Number:  +91 9972032265  

BVRITN Employee ID:   

JNTUH Registration ID:   5462-170127-073109 

Academic & Professional accomplishments:

  1. No. of B.Tech Projects guided: 0
  2. No. of international journal & international conference publications:

Fields of Specialization:

    Machine Design

Fields of interest:

  1. Strength of Materials
  2. Kinematics of Machines

 


M.Tech:
- Machine Design, VTU, 2016
B.E.:
- Mechanical Engineering, GNDEC Bidar, 2014

Mr. Alok Kumar Garje
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  3 months 

Contact Number:  +91 9441615430 

BVRITN Employee ID:  - 

JNTUH Registration ID:   5760-170112-103947 

Academic & Professional accomplishments:

  1. No. of B.Tech Projects guided:
  2. No. of international journal & international conference publications:

Fields of Specialization:

    Machine Design

Fields of interest:

  1. Finite Element Method
  2. Mechanical Vibrations

 

Senthil pp


Ph.D.:
- Manufacturing Engineering, Annamalai University, 2017
M.Tech:
- Machine Design, Bharath University, 2005
B.E.:
-Mechanical Engineering, Arunai Engineering College, 2002

Dr. Senthil Kumar 
Professor, 
Mechanical Engg. Dept. 
This email address is being protected from spambots. You need JavaScript enabled to view it.


Research Experience: 3 Years
Teaching Experience:  - 13.7 Years (including research experience)
Contact Number:  +91 8608608068 

BVRITN Employee ID:   

JNTUH Registration ID:   

Publications

  • Senthil Kumar.P, Lakshminarayanan, P. R., & Varahamoorthi, R (2016), Effect of cooling rate and other factors on size and pattern of distribution of TiB2 particles formed during solidification of the Al/TiB2 melt for various pouring temperatures, International Journal of Latest Engineering Research and Applications, Vol. 01 (08), 30-41. 
  • P.Senthil Kumar, P.R.Lakshminarayanan (2016), Effect on size and pattern of distribution of TiB2 particles formed during solidification of the Al/TiB2 MMC, IPASJ International Journal of Mechanical Engineering (IIJME), Vol. 4 (10), 001-008.
  • Senthil Kumar.P, Lakshminarayanan, P. R., & Varahamoorthi, R (2016), Effect of holding time of the Al/TiB2 melt at the pouring temperature on the formation and size of TiB2 particles formed, Journal of Advanced Microscopy Research, Vol. 11, pp.1–5.
  • Senthil Kumar.P, Lakshminarayanan, P. R., & Varahamoorthi, R (2016), Effect of holding time and pouring temperature on the formation, size and distribution pattern of TiB2 in cast al/ TiB2 MMC, International Research Journal of Engineering and Technology.
  • Senthil Kumar.P, Lakshminarayanan, P. R., & Varahamoorthi, R (2016), Study of Hardness at Different Locations of Cast Al/TiB2 MMC Cast Ingot Based On Microstructures, Materials Today Proceedings.
  • Senthil Kumar.P, Lakshminarayanan, P. R., & Varahamoorthi, R (2017), Effect of Pouring Temperature On The Tib2 In Cast Al/ Tib2 MMC And Prediction Of Distribution Pattern By Commercial Simulation Software.

Conferences

  • Presented a paper “Effect of cooling rate and other factors on size and pattern of distribution of TiB2 particles formed during solidification of the Al/TiB2 melt for various pouring temperatures” at “International Conference on Modern, Intelligent and Green Manufacturing”, Erode Sengunthar Engineering College, Perundurai, Tamil Nadu.
  • Presented a paper ” Effect of holding time of the Al/TiB2 melt at the pouring temperature on the formation and size of TiB2 particles formed” at “National Conference on Processing and Characterization of Advanced Engineering Materials-NCPCAEM 2016”, SSN College of Engineering, Chennai.
  • Presented a paper ” Effect on size and pattern of distribution of TiB2 particles formed during solidification of the Al/TiB2 MMC” at “2nd International Conference on Design, Analysis, Manufacturing and & Simulation”, Saveetha University, Chennai.

Workshops & FDPs

  • Two days National level workshop on “Electron Microscopy” at MEPCO Schlenk Engineering College, Sivakasi on February 2014.
  • National level workshop for “Non-destructive testing-technologies and applications” at St.Joseph’s College of Engineering, Chennai on August 2009.
  • Faculty development program for “Finite Element Analysis” at Thandhai Periyar College of Engineering, Vellore, March 2007.
  • National level workshop for “Emerging Materials & Applications” at Aarupadai Veedu Institute of Technology, Paiyanoor, December 2010.
  • Paper presented on “Solar Radiation Management” at Thirumalai Engineering College, Kanchipuram, on February 2010.
  • National level workshop on “Engineering Materials & Applications” at Aarupadai Veedu Institute of Technology, Paiyanoor, December 2009.
  • Attended “Research Methodology Workshop” at Annamalai University, Chidambaram, January 2015.
  • National level workshop on “Bio-Fuel Engine and its Application” at Annamalai University, Chidambaram, on February 2013.
  • National level workshop on “Micro and Nano Technology – And Implications” at Sri Chandrasekhara Sarawathi Viswa Mahavidhyalaya, Kanchipuram, March 2008.
  • Two days National level workshop on “Industrial Safety, Health and Environment” at Dr. Navalar Neduncheziyan College of Engineering, Tholudur, March 2013.
  • National level workshop on “The Art of Writing Research Article and Publication” at S.K.P Engineering College, Thiruvanamalai, April 2016.
  • Participated “International workshop on Research Methodology” at Karpaga Vinayaga College of Engineering and Technology, Madurandagam, April 2013.

Involvements and Achievements

  • Working as a NBA coordinator for Mechanical department at St.Joseph College of Engineering, Chennai.
  • Working as a Research Cell convener at St.Joseph College of Engineering, Chennai. 
  • Acted as a “Red Ribbon Club” Coordinator at Thirumalai Engineering College, Kanchipuram from 2007 to 2010
  • Participated “Orientation Programme” for RRC Programme Officers at Anna University, Chennai
  • Produced 90.48 % of result in “Introduction to Finite Element Analysis” during Nov-Dec 2009 Anna University Examinations.
  • Acted as a Head of the Department [Mechanical] for three years at Annai Teresa College of Engineering.
  • Acted as a Vice-Principal at Padaleeswarar Polytechnic College, Cuddalore.

 


M.Tech:
- Engineering Design, Thirumalai Engineering college, Kanchipuram, 2017
B.E.:
- Mechanical Engineering, St.joseph college of Engineering, Chennai, 2013

Mr. Muthalugu.R
Assistant Professor,
Mechanical Engg. Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.


Teaching Experience:  2 years 

Contact Number:  +91 6379358638 

BVRITN Employee ID: 03938 

JNTUH Registration ID:  1819-180815-143036 

Academic & Professional accomplishments:

  1. No. of B.Tech Projects guided:04
  2. No. of international journal & international conference publications:

Fields of Specialization:

    Engineering Design

Fields of interest:

  1. Finite Element Method
  2. Strength of Materials
  3. Automobile Engineering


Ph.D.:
- Pursuing, NIT Silchar
M.Tech:
- Thermal Engineering, NIT Silchar, 2013
B.Tech:
- Mechanical Engineering, Bapatla Engineering Colleage, Bapatla, 2010

Mr. K. Obula Reddy
Assistant Professor,
Mechanical Engineering Dept.
This email address is being protected from spambots. You need JavaScript enabled to view it.

Teaching Experience:  6 years (along with Research) 

Contact Number:  +91 8074221041 

BVRITN Employee ID:

JNTUH Registration ID: 

Awards and Recognition:

  1. Achived Outstanding Reviewr Award from two different Elsevier journals
  2. Reviewer for the following International Journals:
  3. International Journal of Hydrogen Energy – Elsevier SCI Journal
  4. Aerospace Science and Technology – Elsevier SCI Journal
  5. Acta Astronautica – Elsevier SCI Journal
  6. Progress in Aerospce Sciences – Elsevier SCI Journal

Academic & Professional accomplishments:

  1. No. of B.Tech. projects guided:
  2. No. of international/National journal& international conference publications:16
  3. No. of Books Published:01

Fields of Specialization:

  1. Thermal Engineering
  2. Advanced Heat and Mass Transfer

Fields of interest:

  1. Combustion in I.C. Engines
  2. CFD-ANSYS- FLUENT

Research Papers Published

  1. Obula reddy kummitha, Krishna murari Pandey & Rajat gupta, Numerical Analysis of Scramjet Combustor with Innovative Designs of Strut Injector, 10th international conference on sustainable energy and environmental protection (june 27th – 30th, 2017, bled, Slovenia), modelling and simulation. https://doi.org/10.18690/978-961-286-058-5.14 ISBN 978-961-286-058-5 © 2017 University of Maribor Press. 
  2. Suneetha Lakka, Obula Reddy Kummitha and K.M Pandey, CFD Analysis of Thermal and Hydraulic Flow Characteristics in Helical Pipe, Proceedings of the 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power December 15-17, 2016, MNNITA, Allahabad, U.P,India. FMFP2016–Paper No.25. 
  3. Obula Reddy Kummitha, Sumeet Pati, Ashis Ranjan, Numerical analysis of energy dissipation and flow dynamics of rectangular flume with different weirs, National conference on Trends in Mechanical Engineering(TIME-15), 23rd September-2015, organised by JNTU Anantapur, India. 

International Conferences Preceedings:

  1. Obula Reddy Kummitha, K.M. Pandey, Rajat Gupta, Optimization of Scramjet Combustor with Different Fuel Injection Techniques and Flame holder Cavities, Combustion Science and Technology, Taylor & Francis, (SCI Journal - Under review). 
  2. Obula Reddy Kummitha, K.M. Pandey, Rajat Gupta, Numerical analysis of hydrogen fuel scramjet combustor with innovative designs of strut injectors, International Journal of Hydrogen Energy, Available online 3 May 2018. https://doi.org/10.1016/j.ijhydene.2018.04.067 (SCI Journal). 
  3. Obula Reddy Kummitha, K.M. Pandey, Rajat Gupta, CFD analysis of a scramjet combustor with cavity based flame holders, Acta Astronautica, Volume 144, March 2018, Pages 244–253. https://doi.org/10.1016/j.actaastro.2018.01.005. (SCI Journal). 
  4. Obula Reddy Kummitha, Numerical analysis of hydrogen fuel scramjet combustor with turbulence development inserts and with different turbulence models, , International Journal of Hydrogen Energy, Volume 42, Issue 9, 2 March 2017, Pages 6360-6368. http://dx.doi.org/10.1016/j.ijhydene.2016.10.137. (SCI Journal). 
  5. Obula Reddy Kummitha, Numerical analysis of passive techniques for optimizing the performance of scramjet combustor, International Journal of Hydrogen Energy, Volume 42, Issue 15, 13 April 2017, Pages 10455-10465. DOI: 10.1016/j.ijhydene.2017.01.148, (SCI Journal). 
  6. Obula Reddy Kummitha, Lakka Suneetha, K.M. Pandey, Numerical Analysis of Scramjet Combustor with Innovative Strut and Fuel Injection Techniques, International Journal of Hydrogen Energy, Volume 42, Issue 15, 13 April 2017, Pages 10524-10535. DOI: 10.1016/j.ijhydene.2017.01.213. (SCI Journal). 
  7. Obula Reddy Kummitha, K.M Pandey, Experimental and numerical analysis of forced convection heat transfer in turbulent flows, International journal of Procedia Engineering-An Elsevier Journal, Indexed in Scopus, Volume 127, 2015, Pages 711–718. 
  8. Obula Reddy Kummitha, V.R Reddy Bandi, K.M Pandey, 3D numerical analysis for thermal– hydraulic characteristics of water flow inside a circular tube with twisted tape with helical protrusions, International journal of Procedia Engineering-An Elsevier Journal Indexed in Scopus, Volume 127, 2015, Pages 1134–1141. 
  9. Obula Reddy Kummitha, Numerical analysis of solid rocket motor core flow with large eddy simulation viscous model, Elsevier - Materials today proceedings, 2016, Volume-3, Issue-10, PP:3820-3825. (Scopus Indexed). 
  10. B.V.R Reddy, Obula Reddy Kummitha, Characterization of spray formed and cold rolled Al-Pb alloy, Materials today proceedings, accepted for presentation in 5th International Conference of Materials Processing and Characterization (ICMPC 2016), organised by GRIET, Hyderabad on 12-13th March 2016, and for publication in Elsevier - Materials today proceedings. (Scopus Indexed). 
  11. Obula Reddy Kummitha, B.V.R Reddy, Thermal Analysis of cylinder block with fins for different materials using ANSYS, accepted for presentation in International Conference on Advancements in Aeromechanical Materials for Manufacturing (ICAAMM-2016), organised by MLRIT, Hyderabad on 7th 9th July 2016, and for publication in Elsevier - Materials today proceedings. (Scopus Indexed). 
  12. K.M.Pandey and P. Bose and K.O. Reddy, Numerical Analysis Comparison of Solid Fuel Scramjets with Viscous Model and Turbulence Chemistry Model at Mach 2, International Review of Aerospace Engineering (IREASE) , Vol. 5 N. 6, December 2012 (Impact Factor-6.5), Praiseworthy prize publications, Italy. (Scopus indexed journal). 
  13. K.M.Pandey and P. Bose and K.O. Reddy, CFD Analysis of Solid Fuel Scramjet Combustors, Global Journal of Researches in Engineering, Volume 12 – A, Issue 7, Version 1.0, October 2012.. 
  14. Oveepsa Chakraborty, Deepak Sharma, K Obula Reddy and KM Pandey, CFD Analysis of Cavity Based Combustion of Hydrogen at Mach Number 1.4, Current Trends in Technology and Sciences, ISSN: 2279-0535. Volume: 1, Issue: 3, (Nov. 2012). 
  15. K Obula Reddy and K.M Pandey, Burnback Analysis of 3-D Star Grain Solid Propellant, International Journal of Advanced Trends in Computer Science and Engineering, Vol.2 , No.1, Pages : 215-223, ISSN 2278-3091, Special Issue of ICACSE 2013 - Held on 7-8 January, 2013 in Lords Institute of Engineering and Technology, Hyderabad. 
  16. K. Obual Reddy, M. Srikesh, M. Kranthi Kumar, V. Santhosh Kumar, CFD ANALYSIS OF ECONOMIZER TO OPTIMIZE HEAT TRANSFER, International Journal of Mechanical Engineering and Technology (IJMET), ISSN 0976 – 6340(Print), ISSN 0976 – 6359(Online), Volume 5, Issue 3, March (2014), pp. 66-76, © IAEME. 

List of Non Teaching Staff